FE-simulations with a simplified model for open-cell porous materials: A Kelvin cell approach
Egileak: Diego Alejandro Montoya Zapata Oscar Ruiz
Data: 01.07.2019
Journal of Computational Methods in Sciences and Engineering
Abstract
In in-silico estimation of mechanical properties of open (Kelvin) cell porous materials, the geometrical model is intractable due to the large number of finite elements generated. Such a limitation impedes the study of reasonable domains. VoXel or Boundary representations of the porous domain result in FEA data sets which do not pass the stage of mesh generation, even for very modest domains. Our method to overcome such limitations partially replaces geometrical minutiae with kinematical constraints imposed on cylindrical bars (i.e. Truss model). Our implemented method uses node position equality constraints augmented with rotation constraints at the joints. Such a method significantly reduces the computational expense of the model, allowing the study of domains of 10^3 Kelvin cells. The results of the tests executed show the accuracy and efficiency of the Truss model in the estimation of Young’s modulus and Poisson’s ratio when compared with current procedures. The method allows application for materials which depart from Kelvin Cell uniformity, since the Truss model admits general configurations. As the simulation is made possible by the Truss model, new challenges appear, such as the application to anisotropic materials and the automatic generation of the Truss model from actual foam scans (e.g. tomographies).
BIB_text
title = {FE-simulations with a simplified model for open-cell porous materials: A Kelvin cell approach},
journal = {Journal of Computational Methods in Sciences and Engineering},
pages = {989-1000},
volume = {19},
keywds = {
computational effciency, in-silico estimation, Kelvin cell, porous materials, Poisson s ratio, Truss mode
}
abstract = {
In in-silico estimation of mechanical properties of open (Kelvin) cell porous materials, the geometrical model is intractable due to the large number of finite elements generated. Such a limitation impedes the study of reasonable domains. VoXel or Boundary representations of the porous domain result in FEA data sets which do not pass the stage of mesh generation, even for very modest domains. Our method to overcome such limitations partially replaces geometrical minutiae with kinematical constraints imposed on cylindrical bars (i.e. Truss model). Our implemented method uses node position equality constraints augmented with rotation constraints at the joints. Such a method significantly reduces the computational expense of the model, allowing the study of domains of 10^3 Kelvin cells. The results of the tests executed show the accuracy and efficiency of the Truss model in the estimation of Young’s modulus and Poisson’s ratio when compared with current procedures. The method allows application for materials which depart from Kelvin Cell uniformity, since the Truss model admits general configurations. As the simulation is made possible by the Truss model, new challenges appear, such as the application to anisotropic materials and the automatic generation of the Truss model from actual foam scans (e.g. tomographies).
}
doi = {10.3233/JCM-193669},
date = {2019-07-01},
}
